Tabla de contenido
Publicidad
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power supply cord is damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to water or rain.
• If the product does not operate normally when following the operating
instructions. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls can result in damage,
and will often require extensive work by a qualified technician to restore
the product to normal operation.
• If the product has been dropped, or the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
Important electrical considerations
Do not attempt to unplug any appliance during an electrical storm.
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and damage
any device connected to it. This stand is no exception. Changes or
modifications to this product not expressly approved by RTX Telecom, or
operation of this product in any way other than as detailed by this manual, could
void your authority to operate this product.
Maintenance and Repair: There are no user serviceable parts inside the
phones. For repairs, return the phone to an authorized Mitel dealer.
CAUTION:
Installation of the IP DECT Stand shall only be performed by Mitel-qualified
personnel.
These notices may appear on the product or in the technical documentation:
Danger indicates an imminently hazardous situation which, if not avoided,
DANGER
will result in death or serious injury.
Warning indicates a potentially hazardous situation which, if not avoided,
WARNING
could result in death or serious injury.
Caution indicates a potentially hazardous situation which, if not avoided,
CAUTION
may result in minor or moderate injury and/or damage to the equipment
or property.
This symbol may appear on the product:
The exclamation point within an equilateral triangle indicates that important
!
operating and maintenance (servicing) instructions are included in the literature
accompanying the product.
Safety Compliance Statements
SELV Compliance
Safety status of I/O connections comply to SELV requirements.
SAVE THESE SAFETY INSTRUCTIONS
Notice to Canadian Customers
Terminal Equipment
NOTICE: This equipment meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed by the registration
number. The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that
Industry Canada technical specifications were met. It does not imply that
Industry Canada approved the equipment.
Radio Equipment
The term "IC":" before the radio certification number only signifies that Industry
Canada technical specifications were met. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. "Privacy of communications may not be ensured when
using this telephone."
IP DECT Stand: IC: 4979B-CT8020
5610 Handset: IC: 4979B-CT8010
ICES-003 Class B Notice - Avis NMB-003, Classe B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norm NMB-003 du
Canada.
Notice to U.S. Customers
FCC IDs:
IP DECT Stand: T7HCT8020
5610 Handset: T7HCT8010
FCC Part 15 Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The Mitel 5610 Cordless Handset is Hearing Aid Compatible (HAC).
Privacy information: Cordless telephones are radio devices.
Communications between the handset and base of the cordless telephone are
accomplished by means of radio waves which are broadcast over the open
airways. Because of the inherent physical properties of radio waves,
communication can be received by radio receiving devices other than your own
telephone unit, consequently, any communications using the cordless
telephone may not be private.
Radio interference information: Radio interference may occasionally cause
buzzing and humming in your cordless handset, or clicking noises in the base
unit. This interference is caused by external sources such as TV, fluorescent
lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises
continue and are too distracting, check around your office to see what
appliances may be causing the problem. In addition, we recommend that the
base not be plugged into a circuit that also powers a major appliance because
of the potential of interference. For best performance, ensure that the antenna
on the base unit is fully extended.
In the unlikely event that you consistently hear other voices or distracting
transmissions on your telephone, you may be receiving radio signals for
another cordless telephone or other source of interference. If you cannot
eliminate this type of interference, you need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To minimize
or prevent such interference, the base of the cordless telephone should not be
placed near or on top of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR will often reduce or
eliminate the interference.
Radio interference causes interruptions in conversation. When this happens,
your unit is not defective. When noise continues, move to a different location
while you talk. (You might even need to move the base unit.) When the situation
persists, contact National Technical Assistance Center.
3
Publicidad
Tabla de contenido
