Controls And Display; Operating Modes - Russell Hobbs 25610-56 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 97

/ 97
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

CONTROLS AND DISPLAY

CONTROLS

Used to set the time (hours and minutes)

hr, min

Used to select the coffee strength. For Grind & Brew mode the options are:

bb. For pre-ground coffee mode the options are OFF or ON.

Number of cups that are being brewed (Grind & Brew mode only). Selects the amount of coffee which will be ground based on the

amount of water in the reservoir. Options: 2, 4, 6, 8 and 10. Default values is 8.

Used to set up the timer.

Mode select. This button selects Grind & Brew mode (display will show

Starts the brewing process.

Initiates self clean mode.

DISPLAY ICONS

Shows the currently selected coffee strength. For Grind & Brew mode the display shows:

pre-ground coffee mode if the strength mode is set to OFF no

b, bb, bbb

will show

Shows the currently selected number of cups being brewed (Grind & Brew mode only).

2, 4, 6, 8 or 10

Grind & Brew mode selected.

Pre-ground coffee mode selected.

The machine needs cleaning. Use the self clean function.

CLE

OPERATING MODES

Your coffee maker has two operating modes.

GRIND & BREW MODE

This mode uses fresh coffee beans to make the coffee.

PRE-GROUND COFFEE MODE

This mode uses pre-ground coffee added directly to the filter to make the coffee.

USING GRIND & BREW MODE

The quality and flavour of your coffee is determined by the type of beans, the grind size and the brewing time. We recommend experimenting with the

grind size and coffee strength button until you find the settings that work best for you.

To select Grind & Brew mode, press the

Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.

Open the filter compartment and place a #4 paper filter into the filter holder. Close the compartment.

Open the coffee bean hopper lid and fill it with fresh coffee beans. Don't overfill the hopper so that you can't refit the lid. The lid seal will help to

keep the coffee beans fresh between uses.

Turn the grind control to the required setting (l fine,

Press the

button to select the number of cups you are brewing. The setting you choose will depend on how much water you have added to the

reservoir. For example, if you have filled the reservoir to the 6 cups mark, set the number of cups to 6 as well. The default setting is 8.

Select the desired coffee strength using the

Press the + button to start brewing. After a short time, the grinder will operate and the light around the button will flash while the coffee is brewing.

Once the coffee is brewed, the light will stop flashing and remain lit.

USING PRE-GROUND COFFEE MODE

To select pre-ground coffee mode, press the

Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.

Open the filter compartment and place a #4 paper filter into the filter holder.

For each large cup, add 6g of ground filter coffee to the filter. The amount of ground coffee you add will depend on how much water you have

added to the reservoir. For example, if you have filled the reservoir to the 6 cups mark, add 6 measures of ground coffee.

Close the filter compartment.

Select the desired coffee strength using the

slowing down the rate that water passes through the pre-ground coffee.

Press the + button to start brewing. After a short time, the light around the button will flash while the coffee is brewing.

Once the coffee is brewed, the light will stop flashing and remain lit.