Range Of Use; Technical Data - T.I.P. Maxima 350 IPX DUO Instrucciones Para El Manejo

Any nonobservance of these instructions involves the danger of bodily harm
to people and/or damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock
which may cause damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the
retailer has to be informed immediately, at the latest within 8 days after the date of purchase.

2. Range of use

Submersible clean- and dirty water pumps from T.I.P. are highly efficient electrical pumps for
discharging clear or dirty water containing solids up to the maximum size specified in the
technical details. These high-quality products with their convincing performance data were
developed for the multiple purposes involved with draining and pumping liquids from one
place to another.
The typical ranges of application of submersible clean- and dirty water pumps include:
draining of ponds, basins, storage containers, dirty water and biological pitches as well as
emergency draining required following flooding or inundation.
In addition, thanks to this special design, this pump can be aspirated in manual operation up
to a residual water level of 1 mm. Submersible clean- and dirty water pumps from T.I.P. are
suitable for stationary or temporary installations.
This product was developed for private use, i.e. not for industrial applications or for
continuous operation.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants
of the pond will be sucked in.
The device is not suitable for use in swimming pools or for the supply of
drinking water.
The pump is not suited to discharge saltwater, faeces, inflammable, etching,
explosive or other hazardous liquids. Please observe the max. temperature
of the liquids to be discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids
being discharged in case of any improper operation or damage of the device.
The lubricants used are biologically degradable and non-hazardous to
health.

3. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
Max. flow rate (Q )
max
Max. pressure
Max. delivery height (H
Max. submersion depth 
Max. size of the solids being pumped
Max. fluid temperature (T
1)
1)
)
max
)
max
Maxima 350 IPX DUO
230 V~ 50 Hz
800 Watt
IPX8
47.80 mm (1 ½ "), male
20,000 l/h
0.8 bar
8 m
7 m
30 mm
35° C
2
13