Product Parameters - Yvolution NEON NITRO 8 Manual Del Usuario

PRODUCT PARAMETERS

Product specifications
Motor power
Battery
Tire Size
Top Speed
Run Time
Dimensions
Product Weight
Max User Weight
NEON NITRO 8
Safety Equipment
HELMET
Always wear a properly fitted helmet when riding NEON NITRO 8. Be sure to attach the chinstraps
and follow the helmet manufacturer's instruction manual. We would also recommend wearing wrist
guards, elbow pads and kneepads for extra protection.
FOOTWEAR
Make sure you wear flat shoes that will grip the board and not slip off your feet while using NEON
NITRO 8. Do not ride barefoot or in sandals.
SAFETY CHECK
Checking your NEON NITRO 8 regularly will help extend the life of your product. Make sure there
are no loose or damaged parts. All nuts and bolts should be tight and all other components should
be in good condition. If you find any breakages please do not use the product until it has been
repaired.
Warning!
Please adhere to your local area's traffic laws. It is your responsibility to familiarize and comply
with these laws. Always be aware of potential hazards and obstacles when using NEON NITRO 8.
Warning: Before performing safety inspection or maintenance on your NEON NITRO 8 make sure
the power is off.
Caution!
Riding with a damaged NEON NITRO 8 will void its warranty.
8
350 W
36.5 V | 4.3 AH | Lith-ion
203 mm | 8 inches
12.5 kmh | 7.7 mph
60 minutes
705 x 235 x 226 mm
27.7559 X 9.252 X 8.898 inch
10.6 kg | 23.4 lbs
70 kg | 154 lbs
EN
Use only with specified charger
in instruction.
Charger specifications
AC 100-240 V
Input
50/60 HZ
Output plus 45 DC 2 Amp
Charging Time 2.5 - 3 hours
Model Number FY - 4202000
Shenzhen
Supplier Fuyuandian Power
Co.,Ltd
UL ID E350715