Uniteck UNIMOS 80/24.2 Manual Del Usuario página 10

EN
Dear customer, thank you for purchasing one of our Uniteck products. Please read all instructions carefully
before using the product.
DESCRIPTION
Unimos is an ultra-compact battery isolator used with 12 or 24V batteries.
Unimos is ideal for charging several batteries from a single charging point (Ex: Alternator). It is installed
between the positive pole of the charging source and the positive poles of the batteries. Hence all
batteries are charged at the same time and do not risk charging or discharging between each other. The
battery banks are completely separated.
Unlike diode isolators or old version of MOSFET isolators, Unimos isolators are equipped with the latest
generation components allowing unequalled performance compared to the current products on the
market with very low voltage drops for more power.
The battery voltage detection (12 or 24V) is automatic.
Example Unimos 200.24/3 with 12V battery
Current / Power
20A – 240W
50A – 600W
100A – 1200W
200A – 2400W
INSTALLATION – FIXING
- Unimos has been designed for indoor use.
- Use the Unimos in a well ventilated room, away from rain and dust.
- To ensure a good air circulation necessary for cooling the isolator, provide a free space of at least
15 cm all around the product.
10/24
Losses
UNIMOS
<0,1 W
< 0,5 W
< 5 W
<15 W
15 cm
www.uniteck.fr
Other losses
MOS isolators
<1 W
< 6 W
< 25 W
< 100 W
15 cm
15 cm
15 cm
Losses
Diode isolators
< 8 W
< 20 W
< 70 W
< 140 W