Uniteck UNIMOS 80/24.2 Manual Del Usuario página 15

Ocultar thumbs Ver también para UNIMOS 80/24.2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNINGS AND ADVICE
Unlike diode load isolator, the Unimos load isolator only causes a very low voltage drop.
Therefore, the output voltage of the load source (e.g. alternator) MUST NOT BE INCREASED.
Follow the battery manufacturer's safety instructions. Incase of doubt, consult your retailer or
installer.
Batteries are likely to produce flammable gas. Avoid all flames or sparks.
When handling the battery (except gel), there is a risk of acid leakage, protect yourself.
Never connect the + and - of the battery or cables: risk of explosion or fire.
Maintenance: check the wiring and all connections at least once a year.
All works must be carried out in accordance with the country's electricity regulations in force.
The equipment used in your installation such as connectors, cables, fuses, disconnectors, etc.
must be adapted and in accordance with the laws and regulations in force in the country for the
application in question.
This equipment is not intended for use by persons (including children) whose physical, sensory
or mental abilities are degraded or persons without experience or knowledge unless they have
been given prior supervision or instruction in the use of the equipment by a person responsible
for their safety.
Children should be supervised to ensure that they are not playing with the device.
PICTOGRAMS
Device conforms to European
directives
Attention! Read the instruction
manual before use.
Product subject to selective collection - Do not
dispose in a domestic waste bin.
www.uniteck.fr
EN
15/24

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Unimos 120/24.2Unimos 160/24.3Unimos 200/24.3

Tabla de contenido