General Information - BGS technic Superseal 1.5 Manual Del Usuario

350-Piece Superseal 1.5 Connector Assortment
CONTENT
- 50 Green F1.0 Wire Seal for cable diameter 1.2 - 1.8 mm
- 50 Yellow F1.4 Wire Seal for cable diameter 1.6 - 2.4 mm
- 50 Male Terminal for cable cross section 0.3 - 0.5 mm²
- 50 Female Terminal for cable cross section 0.3 - 0.5 mm²
- 50 Male Terminal for cable cross section 0.85 - 1.25 mm²
- 50 Female Terminal for cable cross section 0.85 - 1.25 mm²
- 6 Male Housing (1 Pole)
- 6 Female Housing (1 Pole)
- 6 Male Housing (2 Pole)
- 6 Female Housing (2 Pole)
- 4 Male Housing (3 Pole)
- 4 Female Housing (3 Pole)
- 4 Male Housing (4 Pole)
- 4 Female Housing (4 Pole)
- 3 Male Housing (5 Pole)
- 3 Female Housing (5 Pole)
- 2 Male Housing (6 Pole)
- 2 Female Housing (6 Pole)
- Wire Seal Material: Silicone, Seal outer diameter: 6.1 mm
- Terminal Material: Brass
- Housing Material: PA66+GF
- Temperature Range: -40°C to 120°C

GENERAL INFORMATION

This set is made for repairing existing cabling and for new wiring and includes Superseal 1.5 cable
seals, terminals and housings.
IMPORTANT NOTES
Before mounting the terminals into the connector housing, make sure that
•
the pins are properly crimped.
•
the wire has a good electrical connection to the terminal.
•
the sealing fits correctly.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 9634
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed