BGS technic Superseal 1.5 Manual Del Usuario página 6

Stick the pin into the housing until the retaining tongue in
the housing engages on the pin.
When inserting the pins, attention must be paid to the
correct alignment; the crimp side must point towards the
retaining tongue
After inserting the pins, push the locking comb firmly again
into the housing.
Make sure that the safety tabs of the locking comb engage
on the housing.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed