Hach SOLITAX sc Manual Del Usuario página 10

Replacing the Wiper
5.3 Replacing the Wiper
The life of the wiper is dependent on the number of cleaning actions performed and the
type of deposits to be removed. The life of the wiper varies. The wipers supplied with the
instrument should last for approximately one year.
1. From the Main Menu, select Sensor setup and press confirm.
2. Select the appropriate sensor if more than one is attached and confirm.
3. Select Test/Maintenance and press confirm.
4. Select Profile and confirm. Change the wiper, see
5. Select Reset configuration and confirm.
6. Select Reset configuration. Are you sure? and confirm.
Figure 1 Wiper Replacement
1. Wiper arm
2. M4 hex socket head bolt
10
1 2
section 5.3 on page
3
4
3. Wiper
4. Wiper axle
10.
Deutsch