Intended Use; Before Each Ride - SR Suntour COIL SPING Serie Manual Del Propietário

SR SUNTOUR - OWNERS MANUAL

INTENDED USE

Category
NRX
NCX
NVX
NEX
CR9V
CR8V V2
Make sure to select the correct fork according to your frames build in height and per-
sonal riding style. Please note that your fork was not designed for jumping, dropping,
aggressive downhill riding, freeriding or urban style riding. Not following these inst-
ructions could result into a failure of the product, accident and even death of the rider.
Not following these instructions will void the fork's warranty!

BEFORE EACH RIDE!

Do not ride your bike, if one of the following test criteria can't be passed!
Riding your bike without eliminating any defect or carrying out the neces-
sary adjustments can result into an accident, fatal injury or even death.
►Do you notice any cracks, dents, bent or tar-
nished parts at your suspension fork or any
other part of your bicycle? If so, please con-
sult a trained and qualified bicycle mechanic
to check your fork or bike.
►Can you notice any oil leaking out your fork?
Also check out hidden areas like the bottom
side of your fork crown. If so, please consult
a trained and qualified bicycle mechanic to
check your fork or bike.
►Compress your fork with your body weight. If
it feels too soft, relating to the proper pressu-
re to achieve an accurate SAG, inflate it until
you have reached the required value. Please
also refer to chapter " SETTING SAG"
►Make sure your brakes are properly installed/
adjusted and work appropriate. This also
NRX / NCX LITE / NCX / NVX / NEX / CR9V / CR8V V2
Cross Trekking City
applies to every other part of your bike like
handlebars, pedals, crank arms, seat post,
saddle etc. Also refer to the owner's manuals
provided by all other component manufac-
turers.
►Make sure your wheels are centered perfect
ly in order to avoid any contact with your
suspension fork or brake system.
►If you are using a quick release system to fas-
ten your wheel set, make sure that all levers
and nuts are adjusted properly. In case you
are using a through axle system, make sure
that all fixing bolts are tightened with the
appropriate torque values.
ATB
5
English