Operation; Care And Cleaning - Pegasus 67589-0004 Guía De Uso Y Mantenimiento

Operation

1
Flushing and checking for leaks
IMPORTANT: After installation is complete, remove the
aerator to ush the water lines.
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This ushes away any debris that could
cause damage to internal parts.
□
Run water into a large pan or bucket. While
the water is running, check for leaks.
□
Turn off the water, replace the aerator
and clean faucet with warm water and
a soft cotton towel.

Care and Cleaning

□
□
□
Do not use abrasive cleaners when cleaning this faucet.
8