Operation - Pegasus 67388W-8004 Guía De Uso Y Mantenimiento

Installation (continued)
10
Making the water supply
connections
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.

Operation

1
Flushing and checking for leaks
□
Ensure the faucet (A) handles are in the off
position, and turn on the water supply and check
for leaks. If you discover any leaks, check your
connections to ensure they are installed properly.
□
Remove the housing (if applicable). Turn on the
hot and cold handles to allow the water to run
for at least one minute. This ushes away any
debris that could cause damage to internal parts.
□
Turn off the water and reinstall the housing
(if applicable).
1
3
8
2
A