English; Safety Information For Cordless Worklights - Bosch UniversalLamp 18 Manual Original

English

Safety information for cordless worklights

Read all the safety information and instructions. Failure to observe
the safety information and follow instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Please read and observe all safety and general instructions included with the battery
u
or with the power tool supplied with the battery.
Handle the worklight with care. The worklight produces intense heat which in-
u
creases the risk of fire and explosion.
Do not work with the worklight in potentially explosive areas.
u
Do not continue to press the On/Off switch after the worklight has been auto-
u
matically switched off. The battery can be damaged. Ensure that the battery is
charged and that the worklight has cooled before switching on the worklight again.
Use only original Bosch accessories.
u
The light source cannot be replaced. If the light source is defective, the entire cord-
u
less worklight must be replaced.
Remove the batteries from the worklight before carrying out any work on the
u
worklight (e.g. assembly, maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unintentionally pressing the on/off
switch.
Do not direct the light beam at persons or animals and do not stare into the light
u
beam yourself (even from a distance).
Do not use the worklight in road traffic. The worklight is not permitted for illumina-
u
tion in road traffic.
Keep the minimum distance between the cordless worklight and all
illuminated surfaces and objects. Illuminated objects may overheat if
this distance is not maintained.
In case of damage and improper use of the battery, vapours may be emitted. En-
u
sure the area is well-ventilated and seek medical attention should you experience any
adverse effects. The vapours may irritate the respiratory system.
If used incorrectly, liquid may be ejected from the battery; avoid contact. If con-
u
tact accidentally occurs, rinse off with water. If the liquid comes into contact
Bosch Power Tools
English | 13
1 609 92A 4E2 | (06.06.2018)