Quadient DS-75 Desembalar Y Instalar página 5

Install feeders
Note
If a special feeder is available always install it on
the lowest position.
1. Hold the tray slightly inclined as shown in the
figure.
2. Place the front end of the tray underneath the
two black rollers.
3. Lift the tray (lifting the black rollers) until it is
possible to 'hook' the tray into place.
Install slide and envelope catch tray
Note
The slide and catch tray are not delivered if the high
capacity vertical stacker is delivered.
1. Attach the slide.
2. Position the envelope catch tray into the holes
underneath the envelope hopper as shown in
the figure.
3. The distance A should be approximately 1.5 x
the envelope height.
A
3