Save Readings; Delete Readings; Print Readings; Visualize Readings - J.P. SELECTA CD-2004 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTION MANUAL CODE 80199 REV B
DEL
Data deletion
PRN
Print stored readings
VIEW
View stored readings
ASD
Configuration display of auto-
matic switch off
J
.P. SELECTA s.a.
April/2010

6.9 Save readings.

Push «
/ SAVE» directly from the measurement display to store the reading.
(Conductivity, TDS or salinity)
Conductivity, TDS and salinity measures are saved, printed and deleted separately.
Up to 250 conductivity readings, 250 TDS readings and 250 salinity readings can
be stored (total 750). If you store more than this quantity, the new ones overwritte
the first one stored.

6.10 Delete readings.

Deleting the stored readings:
Note: All the readings of the selected measure will be deleted (conductivity, TDS
or salinity). It's not possible to delete just one reading.
First select conductivity, TDS or salinity. They will be deleted in a separate way.
Push «MODE/MEAS».
Push «
/ SAVE» till «DEL» appears in the display.
Push «ENTER/PRINT» to confirm.

6.11 Print readings.

The readings could be printed if the CD-2004 has a printer connected (RS-232
serie connection, Baud rate 9600).
For an instant print of the current reading: Push «ENTER/ PRINT».
For a print of all the stored data: (see 6.9).
First select conductivity, TDS or salinity. They are separately printed.
Push «MODE/MEAS».
Push «
/ SAVE» till the «PRN» display.
Push «ENTER/PRINT» to confirm.

6.12 Visualize readings.

Visualize the stored readings:
First select conductivity, TDS or salinity. As they are separately visualized.
Push «MODE/MEAS».
Push «
/ SAVE» till the «VIEW» display.
Push «ENTER/PRINT» to confirm.

6.13 Automatic switch off.

Configure the CD-2004 to automatically switch off after 2 hours of no use.
Push «MODE/MEAS».
By pushing «ENTER/PRINT».
Select with «
ON :
OFF:

6.14 RS-232 Communication

Use the communications software to register measurements on a PC. Connect the
communications cable to a free COM port.
Speed 9600.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(It can be modified without notice)
»: and «
»
Automatic switch off.
Without automatic switch off.
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

4120410

Tabla de contenido