Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MANUAL INSTRUCCIONES CODIGO 80199 REV B
J
.P. SELECTA s.a.
Abril/2010
6.15 Conductivity sensor manipulation.
•
Follow the own sensor instructions, if there is some.
•
Keep the electrode with its protection.
•
Any hit to the sensor could modify the sensor geometry and so its constant.
•
After measuring concentrated or aggressive solutions, please clean the sensor with
distilled water.
•
After any measurement, clean thoroughly to avoid interferences.
7 Warranty
The warranty covers the defective components and the assembly faults for 1 year from
the purchase date.
Please keep the purchase invoice as the unique valid document of the purchase date.
The warranty does not cover the damage due to a defective operation of the equip-
ment. The equipment must be validated in a suitable way before its use in the valuable
samples analysis for the users.
No goods return are accepted without the previous authorization of J.P. SELECTA, s.a.
8 CE Declaration of conformity
The manufacturer:
Declares that the equipment: CD 2004
Complies with the following european directives :
73/23/CEE
89/336/CEE
Complies with the following standards:
EN 61326:2002
Electrical material for measurement, control and laboratory use. Electromagnetic com-
patibility requirements (CEM).
EN 61010-1:2002
Safety requirements of electrical equipments of measurement, control and laboratory
use. Part 1: General regulations.
Abrera, May 2007
Ramón Ramón
Technical Dtor.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
J.P. SELECTA, s.a.
Ctra. NII Km 585.1
08760 ABRERA (BARCELONA)
SPAIN
Electrical safety directive.
Electromagnetic compatibility directive.
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Pág..: 20
Code: 4120410
David Pecanins
Quality Resp.
Publicidad
Tabla de contenido
