Vimar ELVOX 7549 Manual Do Instalador página 20

ful.
Note: This procedure lets you manually reprogram the buttons
except for the and buttons which require the SaveProg
software.
Programming procedure for the levels of con-
trast and brightness of the LCD
1) Lift the handset.
2) Press the and buttons simultaneously and keep them
pressed until the button starts blinking.
3) Release the buttons.
4) Press one of the 4 buttons beneath the handset:
,
speech unit (by default the Master).
5) Adjust the brightness with the and
the contrast with the or buttons.
6) You exit the procedure with a time out (Conversation time) or by
hanging up the micro-telephone.
Default data restore procedure
1) Lift the handset.
2) Press the and buttons simultaneously and keep them
pressed until the button starts blinking.
3) Release the buttons.
4) Press and hold down the button.
5) When an audible warning is emitted (during the sound) release
the
The indoor unit programming has now been deleted. Make sure
that the programming has been successfully deleted by press-
ing the button. The indoor unit should emit an audible
warning (3 beeps).
These operations are to be done with the indoor unit on
standby and the handset hung up.
Selecting call tunes
You can select the chimes from among 10 call tunes
Button 1 selects the ENTRANCE PANEL CALL tune.
Button 2 selects the INTERCOM CALL tune.
Button 3
electronic module).
1) Press and hold down the button (for 2 s) until the button
starts blinking accompanied by an audible warning.
2) Press button or or and the indoor unit will start playing
the last tune in memory.
3) Repeatedly press button or or
20
you want.
-
4) Press the
Chime volume adjustment
The chime volume can be set to 10 levels.
1) Press and hold down the
button starts blinking accompanied by an audible warning.
2) Press button
volume. Each time the buttons are pressed the volume chang-
es by one level.
3) After selecting the required volume, press button
, ,
ton stops blinking.
buttons and adjust
Muting the chime (User Away function)
To mute the chime, press the
and the
tivation is signalled by a "high-pitched" tone and the
going out. With the user away, the indoor unit is able to keep up
to 4 missed calls in memory by blinking the
the counter is reset. This function can be activated with the indoor
unit at rest.
button.
Adjustments (during a conversation)
Brightness adjustment (10 levels with indoor
unit in a conversation)
Adjustment is possible during communications and self-starting,
press the
the brightness.
External call voice unit volume adjustment (10
levels with indoor unit in a conversation)
Use the
the desired level. A beep is emitted on reaching the maximum or
minimum level.
It is adjusted during a conversation.
Internal call voice unit volume adjustment (10
levels with indoor unit in a conversation)
Use the
the desired level. A beep is emitted on reaching the maximum or
minimum level.
It is adjusted during a conversation.
to select the kind of tune
button to save the tune or wait 15s. At the end of
button goes out.
button (for 2 s) until the
to decrease or to increase the chime
button and hold it down (approx-
button lighting up with a steady light. Chime reac-
button. Saving
and buttons (underneath the handset) to adjust
and buttons (underneath the handset) to adjust
and buttons (underneath the handset) to adjust
to save
but-
button
EN