Charging The Unit; Usage Instructions - Brunton Sustain Manual Del Usario

Charging the Unit

The BRUNTON Sustain or Impel unit needs to be charged before it is
used. It can be charged via the vehicle-adapter, the USB 2.0 connector
or using solar power.
Charging the unit via the Wall Adapter:
1. Plug the wall outlet-adapter into the 12V Input Jack on the
BRUNTON Sustain or Impel unit.
2. Connect the wall adapter to the electrical source.
3. Leave the unit in place until fully charged.
4. Unplug the wall adapter from the electrical source and
unplug the USB cable from the BRUNTON Sustain or Impel.

Usage Instructions

Charging with the BRUNTON Sustain or Impel cable:
1. Fully charge your BRUNTON Sustain or Impel unit.
2. Plug the provided USB connector into the Sustain or Impel.
3. Connect the other end of the USB cable to the electronic device
needing power. The (6) AC adapter tips provided with the unit
can be used to charge a laptop device as needed.
4. Wait until the electronic device is fully charged.
5. Unplug the USB cable from the electronic device.
6. Unplug the USB cable from the Sustain or Impel unit.
7. Recharge the BRUNTON Sustain or Impel unit as necessary.
8