Brunton Sustain Manual Del Usario página 9

Charging with a USB cable that was supplied with your 5V electronics
unit:
1. Fully charge your BRUNTON Sustain or Impel unit.
2. Plug the USB cable supplied with your portable electronic device
into the USB port on the BRUNTON Sustain or Impel. Plug the
other end of your cable into the electronic device needing
power.
3. Wait until the electronic device is fully charged.
4. Unplug the cable from the electronic device and from the
BRUNTON Sustain or Impel.
5. Recharge unit as necessary.
Note: if you need another adaptor to use with your BRUNTON
portable power product, please visit our website at
to purchase the adaptor you need.
BRUNTON, Limited Warranty
BRUNTON warrants this product to be free of defects in materials and
workmanship for a period of one year. This warranty extends to the
original purchaser for one year from the date of purchase.
This warranty is void and a charge for repair will be made if the product
has been damaged by negligence, accident or mishandling, or has not
been operated in accordance with standard operating procedures, or if
the product was altered or repaired by other than a BRUNTON repair
facility.
9
www.brunton.com