Chapter 1. Introduction; Chapter 2. Safety Information (Precautions And Warning) - B.A. International Optima OS600L Instrucciones De Uso

Chapter 1. Overview
1.1 Operating Principle
This device is an unit that consists of a main body, BLDC (brushless DC) motor, and foot pedal switch for driving and operating a handpiece for dental implant procedures,
to be used in dentistry in the field of implant surgery.
The main body of this device is powered by an external power supply that converts alternating current to direct current, which turns the BLDC motor; the rotation power of
which combines with the handpiece to perform the dental implant procedure.
The main body of the implant unit can be adjusted in terms of its torque, rotation speed, water injection volume, and rotational direction.
The BLDC motor can be operated using the foot pedal switch.
1.2 Purpose of Use
This is an engine used to power handpieces used for implants when performing dental implant procedures.
1.3 Users
Only qualified dentists may use this device in a professional environment..
1.4 Indications of Use
1) Where there is an absence of gum or teeth caused by cavities, gum disease, accidents or tumors.
2) Where enamel ablation is not recommended so as to protect the adjacent natural teeth.
3) Where the patient does not want denture treatment.
4) Where the patient wants to replace partial or full dentures that were previously used with a fixed-type dental prosthesis.
5) Where the patient wants full dentures to be replaced with some partial dentures and some fixed-type.
6) Where the patient requires implant support in relation to the lower dentures to maintain the full denture and also improve its function.
1.5 Checklist Prior to Use
1) Be sure to read the user manual prior to use.
2) Only to be used by a professional in a professional environment..
3) Not to be used for anything other than its intended use.
Chapter 2. Safety (Warnings and Cautions)
2.1 Risks
1) If the cause of malfunction is unknown or if it cannot easily be resolved, please contact your dealer or your nearest BA repair centre.
2) If the display shows incorrect information, please contact your dealer or your nearest BA repair centre immediately.
3) Do not let the patients come into contact with the signal input piece, the signal output piece or other connecting pieces.
2.2 Notice
1) This product was designed to be used in implant procedures. The device should only be used in accordance with its intended usage and method.
2) The safety of the patient comes first and foremost. Be sure to pay sufficientattention when using the device.
3) Carefully study the user manual prior to use. Please familiarise yourself with the function of each part before using.
4) The main body and foot pedal switch of the implant unit cannot be cleaned in an autoclave. If the main body becomes contaminated, disconnect the power and clean with a clean,
damp cloth, then wipe away the moisture with a dry cloth.
5) Prior to plugging in the device, check to confirm that the input voltage matches that of the device.
6) Any used water injection tube should be disposed of as medical waste.
2