Troubleshooting - Airthereal MA10K-PRODIGI Manual Del Usuario

TROUBLESHOOTING

If you suspect a problem with your unit, please first check the following:
1. Unit is plugged in properly and turned on.
2. Wall outlet is effective.
3. Clean or change the ozone plates as follows if the ozone output is weak.
Replacing the Ozone Plate
1. Unplug the unit from the power cord.
2. Unscrew the four screws on both sides of the machine to remove the top of the case.
Press the handle, loosen the ozone holder, and remove the ozone plate.
3. Clean it with water or replace it with a new one.
4. Make sure the plate is dry and the metal terminals contact well.
Pry-out
11