®
The Bluetooth
AC operation
1. Unwind the AC power cord to its full length.
2. Connect the plug to the AC mains inlet of the unit, and then the mains plug into
a standard AC socket outlet.
Note: Make sure the AC plug is fully inserted into the socket outlet.
3. To switch the unit off completely, turn off power and volume before withdrawing
the power cord from the wall outlet.
NOTE:
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
• Please disconnect the mains plug from the AC outlet if the appliance is not
going to be used for a long period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the unit from the mains socket and plug it back in.
1. Press the STANDBY/MODE button once to turn the unit on.
2. Press and hold STANDBY/MODE for three seconds to turn the unit off.
POWER SOURCE
Sound & Light Tower operates on AC 110-240V, 50/60HZ.
AC Outlet
AC Outlet
TURNING THE DEVICE ON AND OFF
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING SHOCK HAZARD-DO NOT OPEN
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
AC-