Brizo Virage Serie Manual Del Usuario
Ocultar thumbs
Ver también para Virage Serie:
- Manual del usuario (8 páginas) ,
- Manual de instrucciones (6 páginas) ,
- Instrucciones de montaje (6 páginas)
Publicidad
Enlaces rápidos
U P
®
ASME A112.18.1 / CSA B125.1
ICC/ANSI A117.1
Models/Modelos/Modéles
T67330 & T67430
Series/Series/Seria
Virage™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de vál-
vulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
C
®
®
?
®
TWO HANDLE ROMAN TUB TRIM
LLAVE Y SUS ACCESORIOS PARA BAÑERA
ROMANA DE DOS MANIJAS (MANERALES)
ACCESSOIRES DE FINITION DE ROBINET
À DEUX POIGNÉES POUR BAIN ROMAIN
T67330
"The Commonwealth of Massachusetts requires all hand-held shower sprays to comply with the Massa-
chusetts State Plumbing Code 248 CMR whereby their installation shall include a device that limits the
maximum deliverable temperature of hot water to 110°F and an approved backflow prevention system ."
"La Commonwealth de Massachusetts requiere todos los aerosoles de mano de la ducha conformarse
con el código 248 CMR de la plomería del estado de Massachusetts por el que su instalación incluya
un dispositivo que limite la temperatura entregable máxima de la agua caliente a 110°F y a un sistema
aprobado de la prevención de la expulsión."
« Le Commonwealth du Massachusetts exige de tous les pulvérisateurs tenus dans la main de douche
d'être conformes au code 248 CMR de tuyauterie d'état du Massachusetts par lequel leur installation
inclue un dispositif qui limite la température livrable maximum de l'eau chaude à 110°F et à un système
approuvé d'empêchement de refoulement. »
1
T67430
3/32" (2.38mm)
1/8" (3.17mm)
3/32" (2.38mm)
8/11/09
Rev. A
Publicidad
Manuales relacionados para Brizo Virage Serie
Resumen de contenidos para Brizo Virage Serie
- Página 1 Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) 1/8" (3.17mm) For easy installation of your Brizo ® faucet you will need: 1/8" (3.17mm) • To READ ALL the instructions completely before beginning.
-
Página 2: Instructions De Nettoyage
This warranty excludes all industrial, commercial & business usage, whose purchasers are vice. Replacement parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and hereby extended a five year limited warranty from the date of purchase, with all other terms Canada) or by writing to: of this warranty applying except the duration of the warranty. - Página 3 Model / Modelo / Modèle T67330 RP62448▲ Hot & Cold ▲ Specify Finish Handle Assemblies Especifíque el Acabado RP62446▲ Ensambles de Manijas Set Screw & Button Précisez le Fini Para Caliente y Fría Tornillo de Presión y Botón Vis de Calage et Bouton Eau chaude et eau froide manettes RP62372▲...
-
Página 4: Mantenimiento
RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance If faucet does not divert water from the spout to the handshower, If faucet leaks from spout outlet–Shut off water supplies– check that the lift rod (1) is securely threaded into the diverter (2). If the Replace Seats and Springs (1). - Página 5 T67430 T67330 TURN OFF WATER SUPPLIES. TURN OFF WATER SUPPLIES. Model T67430 Model T67330 Note: The deck and valve rough-in must be finished before installing Note: The deck and valve rough-in must be finished before installing the trim kit. the trim kit. Look for handle bases (the 2 with the smaller diameter hole) and place one Look for handle bases (the 2 with the smaller diameter hole) and place one base (1) over the cold side valve (2).
- Página 6 T67430 T67330 3/32" (2.38 mm) 3/32 po T67330 T67430 Model T67330 Model T67430 Remove set screw (1). Remove and discard test cap (2). Unscrew the test cap (1) and discard. Look for the spout base (the one with the larger hole with 2 flats) and place Look for the spout base (the one with the larger hole with 2 flats) and place base (1) with the two flats facing toward the end valves over the spout shank base (1) with the two flats facing toward the end valves over the spout shank...
- Página 7 T67430 T67430 T67430 T67430 For Model T67430 Only Remove conical nut (1) from handshower nest (2) and insert braided metal Insert the lift rod assembly (1) into the spout and screw it into the diverter hose through the handshower nest. Reassemble test cap (3) to braided assembly which is part of the rough-in.
- Página 8 T67330 T67430 T67430 T67430 Model T67330 Model T67430 Remove spout tip and gasket (1) with wrench (2) provided. Turn faucet handles Pull hose (1) to its farthest extension and point it down into the tub. Pull (3) all the way on. Turn on hot and cold water supplies and flush water lines the lift rod (2) up to the full on position and flush water lines for one minute.