Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Power supply

Do not open the power adapter housing. There will be a danger of
electric shock when the housing is open. It contains no user-
serviceable parts.
The power socket must be in the vicinity of the device and within reach of the
power adapter cables. DO NOT stretch the power cables tightly to reach a
power socket.
Remove the power cord from the power socket to disconnect your device
from the power source. Always hold the power supply unit firmly when taking
it out. Never pull the lead power cable.
Do not cover the power supply unit to avoid damage by overheating.
Stop using the power supply unit if the housing or the feed line to the device
is damaged. Replace it with a power supply unit of the same type.
Only use the power supply unit (Ktec, KSAD1200150W1EU).
Only use the power supply unit at earthed power points with
AC 200-240V~, 50 Hz.
Either pull out the power plug when the device is not in use or connect the
device to a master/slave power bar to avoid power consumption when the
device is switched off.
We recommend the use of a surge protector to provide additional protection
against electric shock, power surges, lightning strikes, or other electrical dam-
age to your device.
Safety instructions
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md 90147

Tabla de contenido