Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Power supply

Do not open the power adapter housing. There will be a danger of
electric shock when the housing is open. It contains no user-
serviceable parts.
The power socket must be in the vicinity of the device and within reach of the power
adapter cables. DO NOT stretch the power cables tightly to reach a power socket.
Remove the power cord from the power socket to disconnect your device from the
power source. Always hold the power supply unit firmly when taking it out. Never
pull the lead power cable.
Do not cover the power supply unit to avoid damage by overheating.
Stop using the power supply unit if the housing or the feed line to the device is dam-
aged. Replace it with a power supply unit of the same type.
Only use the power supply unit (Ktec, KSAD1200150W1EU).
Only use the power supply unit at earthed power points with AC 200-240V~, 50 Hz.
Either pull out the power plug when the device is not in use or connect the device to
a master/slave power bar to avoid power consumption when the device is switched
off.
We recommend the use of a surge protector to provide additional protection against
electric shock, power surges, lightning strikes, or other electrical damage to your de-
vice.
Safety instructions
ES
EN
DE
EN
ES
PT
DK
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md 90148

Tabla de contenido