Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Before using your new RF modulator and switch read this
instruction manual to prevent any damage. Put it away in a safe
place for future references.
•
Clean only with a soft, dry cloth.
•
Do not try to open the equipment, may cause malfunction and
warranty repeal.
•
Do not use or store the equipment near wet places. May cause
malfunction or shock hazard.
REQUIRED EQUIPMENT
- If the AV equipment have stereo outputs, one audio / video cable with
3 RCA connectors in each end
- If the AV equipment have mono outputs, one audio / video cable with 2
RCA connectors in each end
CONNECTING RCA AND S-VIDEO CABLE
If video source is in stereo:
1.- Locate the RCA connectors into the modulator, then insert one AV
cable on them.
2.- Plug the other end into AV device output jacks.
Make sure the colors match on both equipments.
IMPORTANT
(NOT INCLUDED IN THE PACKAGE)
ENGLISH-02
Publicidad
Tabla de contenido
