Front Panel - Intellinet Network Solutions 561297 Guia De Inicio Rapido

English
The Intellinet 48-Port Gigabit Ethernet Switch with 10 GbE Uplink offers an array of features while providing superior
network throughput.
Equipped with 48 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of
performance for your computers, servers and other networking devices. In addition, two 10 GbE small-form-factor
pluggable GBIC module slots (SFP+) provide fiber connectivity for greater distances. These are not shared combo-
ports, but true 10 Gigabit ports, pushing the total available bandwidth up to 136 Gbps.
Equipped with two 10 GbE SFP+ open slots, the Intellinet 48-Port Gigabit Ethernet Switch is the ideal solution for cost-
sensitive organizations considering 10 Gigabit Ethernet. With 10 GbE technology going mainstream and becoming
ever more popular, the need for additional bandwidth has become more urgent than ever before — even in smaller
networks. Whether you wish to connect servers, network attached storage units or NVRs at 10 Gbps, or perhaps you
simply want to connect to another Gigabit switch without resorting to LACP techniques, 10 GbE provides the solution.
This guide presents the basic steps to set up and operate this device. For detailed instructions and
specifications, refer to the user manual enclosed with this product or at intellinetnetwork.com.

Front Panel

LED
Power
1~48
Link/Act/Speed
49~50
Link/Act
SWITCH
Flow Control
The pictured LEDs above show the connection of devices to the switch. Three devices are connected to ports
43, 44 and 46 at 10/100 Mbps. Three devices are connected to ports 45, 47 and 49 (SFP) at 1 Gigabit speed.
Additionally, port 50 (SFP) has an established connection to another port at speeds of 10 Gbps.
2
COLOR STATUS
Green
Orange
(10/100 Mbps)
Green
(1000 Mbps)
Flashing
1 G
(1 Gbps)
10 G
(10 Gbps)
Flashing
STATUS
On
Off
48-Port Gigabit Ethernet Switch with 10 GbE Uplink
On
Off
On A device is connected to the port
Off A device is disconnected from the port
On A device is connected to the port
Off A device is disconnected from the port
OPERATION
Activate IEEE 802.3x flow control.
Deactivate IEEE 802.3x flow control.
STATUS DESCRIPTION
Power On
Power Off
Sending or receiving data
Sending or receiving data