Front Panel - Intellinet Network Solutions IPS-24G02-370WB Guia De Inicio Rapido

Instructions
The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports offers
an array of time-saving, cost-effective features while providing superior network throughput.
No configuration is required and installation is plug and play. With a backplane speed of 52
Gbps, plenty of performance is available for your computers, servers and other networking
devices. Each of the ports automatically senses the link speed of the connected network
device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.
This PoE switch is designed to provide compatible devices with enough power when needed.
It offers up to 30 watts of power per port until its power budget of 370 watts is reached.
Green Ethernet Technology
This Intellinet Network Solutions switch detects link status to all connected devices and
reduces the power usage of ports not in use. In addition, the switch can adjust the level of
power output based on the length of the network cable connected to a particular port. This
feature allows for the enjoyment of maximum network performance, and when things slow
down, it automatically scales back power usage to conserve energy and save money.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/561907 or scan the QR code on the cover.

Front Panel

LED
PWR
LNK/ACT
(1-24;
25 & 26
[SFP])
PoE (1-24)
PoE Max
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Slide Switch
• Default: default mode; allows normal communication between ports 1 – 26.
• VLAN: isolates ports 1 – 24 from each other while allowing
them to connect to ports 25 and 26.
• CCTV: set PoE ports to full 10 Mbps and extend Ethernet up to 250 meters (820 ft.).
2
English
COLOR STATUS
Off
Green
On
Off
Green
On
Flashing
Off
Orange On
Flashing
Off
Orange
On
STATUS DESCRIPTION
No device is connected to the port.
A device is connected to the port.
Sending or receiving data
No powered device (PD) is connected to the port.
The connected device is receiving power.
Abnormal power supply
The system is using less than 296 W.
The system has reached a total power output of 296 W.
The PoE total is nearing its maximum level of 370 W.
Power Off
Power On