Front Panel; Rear Panel - Intellinet Network Solutions IPS-05G-60WB Manual De Instrucciones

The 5-Port Gigabit PoE Passthrough Switch is designed to take power from a PoE switch and
pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e
or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can: power up to
four wireless LAN access points and bridges, VoIP phones and/or IP video cameras; draw its own
power from the PoE switch it's connected to; and deliver network speeds of up to 1,000 Mbps.
When you connect the PD port (Port 1) to a PoE-enabled, IEEE 802.3af/at-compliant PoE switch, the
Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch uses some of the electric current to
power itself (4 watts) and passes the available surplus power to up to four PoE edge devices, such as
IP cameras, allowing you to realize the full potential of each of the PSE ports in your data center.
For specifications, go to intellinetnetwork.com. Register your product at register.
intellinet-network.com/r/561082 or scan the QR code on the cover.

Front Panel

LED Color
PWR
Green
Link/Act Green
PoE Green

Rear Panel

This switch is equipped with five Gigabit ports, a power connector and an on/off switch. Each of
the four PSE ports (Ports 2-5) can provide up to 30 watts. The product is compliant with IEEE 802.3af
and IEEE 802.3at standards and can be powered either by the included adapter or via PoE.
2 English
Status
Off No power is supplied to the switch.
On Power is supplied via the AC adapter or the PD port.
Off No network link is established.
On A network link has been established.
Flashing A network link has been established and data packets are being sent and received.
Off Port is not supplying power to a connected PoE device.
On Port is supplying power to a connected PoE device.
Status Description
Instructions