Degometal GO251 Manual página 23

 Nose piece B
blind rivets, stored in tool kit
 Nose piece C – for riveting dia. 4,0mm blind rivets,
stored in tool kit
 Nose piece D – for riveting dia. 4,8/5,0mm blind
rivets equipped on tool
 Wrench – for nose pieces changing
 Battery charger set
 Battery(s)
4,0Ah/8-cell
Model GO264: Refer to GO264 fig.A
1. nose pieces
2.front sleeve
3. hook
4. power illustration
5. mandrel collector
6. warning light
7. trigger
8. Battery
9-15. accessories
16. 3-jaw set
Accessories
 Nose piece C - for riveting dia. 4,0mm blind rivets,
stored in tool kit
 Nose piece D - for riveting dia. 4,8/5,0mm blind
rivets stored in tool kit
 Nose piece E – for riveting dia. 6.0mm blind rivets,
stored in tool kit
- for riveting dia. 3,0/3,2mm
14.4V 2,0Ah/4-cell
21
or/and 14.4V