Cleaning The Unit - essentiel b CELESTIN Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Cleaning the unit

For optimal performance, the appliance should be emptied and cleaned regularly. If the
water/dust container and filter are dirty, the suction performance will decrease.
1.
Press the button to open the container and separate it from the motor unit (Fig. 6).
2.
Pull the F5 fine particulate filter/pre-filter unit out of the container (Fig. 7).
3.
Empty the waste from the water/dust container into a dustbin and, if necessary,clean
the inside of the container with a soft and slightly damp cloth, then allow it to fully dry.
4.
Turn the fine particulate filter to remove it from the pre-filter (Fig. 8).
5.
Dust the various elements using a soft, dry brush, then rinse them with lukewarm water
and allow them to fully dry in the open air for 24 hours.
6.
Reassemble the elements in the container (Fig. 9).
24
V.1.0
cleaningandmaintenance
Figure 6
Figure 9
Figure 7
Figure 8
Figure 10
Figure 11

Publicidad

Tabla de contenido
loading

Tabla de contenido