Operator Fastening - Genius Shutter 07R Manual Del Usuario

Place the operator on the tube and insert the bracket between the tube and the operator.
If the operator has to be fastened with a through screw, a complete disassembly of the crown is recommended.
Different fittings are possible:
Ø 6 0
Standard bracket
Rapid bracket (except for 140Nm)
1. Drilling
a Fastening holes
b Cable outlet holes

2. Operator fastening

Ø3 4 - 4 2 - 4 8 Ø 6 0
1
2
The fitting by means of a screw can be carried out as follows:
A: screwed in the tube
B: pressure-fit on the tube
B
A
Ø 7mm
7
Bracket
Tube