Eiko Xeleum Instrucciones De Instalación página 2

INSTALLATION:
ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!
1. THE STAINLESS STEEL MOUNTING BRACKET IS GENERALLY MOUNTED FIRST. THE MOUNTING HARDWARE
AND METHOD OF ATTACHMENT IS PROVIDED BY OTHERS.
• NOTE: THERE ARE FOUR HOLES ON THE BRACKET FOR MOUNTING. THESE HOLES ARE ELONGATED 1 7/32"
LONG BY 1/2" WIDE AND REQUIRE SUITABLE HARDWARE.
2. THE PATHFINDER FIXTURE SITS DOWN ON A HOOK FEATURE DESIGNED INTO THE FIXTURE MOUNTING
BRACKET. THIS HOLDS THE WEIGHT OF THE FIXTURE.
3. THE FIXTURE IS THEN ROCKED TOWARDS THE FIXTURE MOUNTING BRACKET TO REST FLUSH WITH THE
BRACKET AND ALIGN TO ITS MOUNTING HOLES.
1
4. USE THE PROVIDED MOUNTING HARDWARE TO SECURE THE PATHFINDER TO THE BRACKET IN THE ORDER:
WASHER, LOCK WASHER, SCREW. DO THIS FOR ALL 3 MOUNTING HOLES.
5. THE FIXTURE SHOULD BE TIGHTLY SECURED TO THE WALL. GIVE THE FIXTURE A FIRM, YET NOT EXCESSIVE
PULL TO ENSURE IT DOES NOT WOBBLE.
4
6. PLUG IN THE PROVIDED WIRING HARNESS (WHIP) 'QUICK-CONNECT' CONNECTOR TO THE SOCKET LOCATED
ON THE SIDE OF THE PATHFINDER FIXTURE.
7. MAKE 3-WIRE MAINS AC ELECTRICAL CONNECTIONS. SEE ELECTRICAL CONNECTIONS SECTION ABOVE FOR
DETAILED INSTRUCTIONS. ADVISORY: THIS IS AN IP66 RATED SYSTEM. INSTALLER TO ENSURE A WATER-TIGHT
CONNECTION AT THE JUNCTION BOX.
2 3
5