Publicidad
Enlaces rápidos
I N S T A L L A T I O N
1
This product must be installed in accordance with the applicable installation code, by a person
familiar with the construction and operation of the product and the hazards involved. Ensure power
is off before installation, verify electrical plan first, read all installation instructions before beginning
installation. With the constant development of our products please check our website (www.modalight.com)
for any possible changes to the installation of this product.
Este producto debe ser instalado de acuerdo con el código de instalación por una persona familiarizada con la construcción y
operación del producto y los riesgos que entraña. Asegúrese que la electricidad este apagada antes de la instalación, verifique plan
electrico, lea todas las instrucciones de instalación antes de comenzar instalación. Con el desarrollo constante de nuestros productos,
visite nuestro website (www.modalight.com) para todos posibles cambios en la instalación de este producto.
Ce produit doit être installé en conformité avec le code d'installation applicable, par une personne familière avec la construction et
l'exploitation du produit et les risques encourus. Assurer que l'alimentation est coupée avant l'installation, vérifiez le plan électrique
d'abord, lire toutes les instructions d'installation avant de commencer installation. Avec le développement constant de nos produits s'il
vous plaît consulter notre site web (www.modalight.com) pour toutes les modifications possibles à l'installation de ce produit.
2
Verify electrical plan and ensure all hardware is present.
Verificar plan electrico y verifique que todo el equipo esté presente.
Vérifier le plan électrique et assurer que tout le matériel est présent.
5' Leader Cable
3
Wiring
Cablería
Cables
24v Driver
DMX Controller
Due to continuous improvements and innovations, specifications may change without notice.
Please refer to our website for current technical data. These figures are provided as a guideline
only and may vary with differing power supplies and installtions. All rights reserved. E&OE.
DRY LOCATION INSTALL
INSTALACIÓN DE LUGARES SECOS
INSTALLATION EMPLACEMENT SEC
Jumper Cable
!
Max Continuous Run: 30' (9.14m)
Continuidad Máxima: 30' (9.14m)
Run Continue Max: 30' (9.14m)
LD180
Fixture to Fixture Connection
955 White Drive Las Vegas, NV 89119 | T: 702 407 7775
F: 702 407 7773 | www.modalight.com | © Copyright 2016
RGB ZILVA
Terminator
RGB Zilva
VDC20161411
Publicidad
Manuales relacionados para Moda Light RGB ZILVA
Resumen de contenidos para Moda Light RGB ZILVA
- Página 1 RGB ZILVA I N S T A L L A T I O N This product must be installed in accordance with the applicable installation code, by a person familiar with the construction and operation of the product and the hazards involved. Ensure power is off before installation, verify electrical plan first, read all installation instructions before beginning installation.
- Página 2 RGB ZILVA I N S T A L L A T I O N Compatible driver list Lista de controladores compatibles Liste des pilotes compatibles Non Dimming Voltage Range Wattage IP Rating Max Load MP17 100-277v AC 150w IP67 44ft Screw in mounting clips 8”...
- Página 3 RGB ZILVA I N S T A L L A T I O N Slide Zilva onto both mounting clips to secure. Deslice Zilva en ambos clips de montaje para fijar. Faites glisser Zilva sur les deux clips de fixation pour sécuriser.
-
Página 4: Connection Types
RGB ZILVA I N S T A L L A T I O N Connect terminator Conectar terminador Connectez terminateur Connect Terminator Terminator MUST be placed on final fixture! Terminator DEBE ser colocado en el último accesorio! Terminator DOIT être placé sur dernier match! - Página 5 RGB ZILVA I N S T A L L A T I O N Maximum lengths Longitudes máximas Longueurs maximales 120v AC 277v AC PRODUCT RGB ZILVA 30 pcs 30 pcs Accessories Accesorios Accessoires PRODUCT DESCRIPTION SIZE ITEM NO. FINISH...
- Página 6 All MODA LIGHT products should be installed by a Licensed Electrician to local & national code. Do not modify, adapt or cut any MODA LIGHT components, plugs or accessories. Any modifications will void the warranty and may create a potential safety hazard. Do not put on the same circuit as inductive loads. Incorrect wiring will result in irreparable permanent damage to the LEDs and fixture. MODA LIGHT tests all products before shipping, and will not replace items that have been destroyed by incorrect wiring or handling.