Power Connection - SOUNDMASTER Highline UR 922 Manual Del Usuario

1) SNOOZE / SLEEP BUTTON
2) |<< / MONTH-DAY / °C/°F BUTTON
3) INFRARED SENSOR
4) >>| / YEAR / DST BUTTON
5) ON / OFF BUTTON
6) PROJECTION UNIT
7) AM/FM BAND BUTTON
8) ALARM 1 RADIO / BUZZ BUTTON
9) ALARM 2 RADIO / BUZZ BUTTON
10) ALARM SET BUTTON
11) MODE BUTTON
12) FOCUS ADJUSTMENT FOR
PROJECTION

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up
system, it requires a 3V CR2032 that lithium battery. Insert the battery in the battery compartment,
making certain that the positive and negative (+ and -) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment. If an AC power failure occurs; the
clock and timer memory continue running. When the AC power resumes, the clock switches back to AC
again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – press mode set button (11) in normal mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press mode set button (11) to change
the mode cycle as follows:
Normal Year Month
Action (during data adjustment):
- Press |<< / MONTH-DAY / °C/°F button (2) to adjust data backward.
- Press >>| / YEAR / DST button (4) to adjust data forward
- Keep depress |<< or >>| button for 2 seconds to enable auto forward
B. Setting Alarm 1 and Alarm 2 – press Alarm set button (10) during normal mode and keep depress
over 2 seconds to enter alarm set mode, after enter the setting mode, press Alarm set button (10)
to change the mode cycle as follows:
Normal AL 1 Hour
Normal
Day 12/24 H
AL 1 Min AL 1 weekend Alarm
ENGLISH
13) LCD DISPLAY
14) SPEAKER
15) TUNING KNOB
16) VOLUME KNOB
17) DISPLAY AUTO OFF / LOW / HIGH DIMMER
18) PROJECTION TIME 180° FLIP BUTTON
19) PROJECTION ON/OFF BUTTON
20) BATTERY DOOR
21) RESET BUTTON
22) FM ANTENNA
23) RATING LABEL
24) TEMPERATURE SENSOR
25) AC POWER CORD
RTC Hour RTC Min
AL 2 Hour
ENG 1
Normal
AL 2 Min AL 2 weekend alarm