Honeywell 50001137-001 Instrucciones De Instalación página 4

50001137-001 COVER PLATE ASSEMBLY
Mount Medium Cover Plate to a Vertical 2 in. X 4 in. Electrical Box (See Fig. 3)
1. Position the bracket on the electrical box. Insert two #6-32 X 5/8 flat head screws. Check leveling, if desired, and
tighten the flat head screws.
2. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall plate on
the bracket with the arrows pointing up.
3. Insert two #6-32 X 1/4 pan head screws and tighten.
Fig. 3. Mount bracket, cover plate, wall plate and thermostat to a vertical 2 in. X 4 in. electrical box.
69-1738EFS—1
ELECTRICAL BOX
WIRE
BRACKET
#6-32 X 5/8 FLAT HEAD
SCREWS (2)
U P
COVER PLATE
WIRE HOLE
MOUNTING HOLES (4)
WALL PLATE
4
WIRE HOLE
MOUNTING HOLES (2)
#6-32 X 1/4 PAN HEAD
SCREWS (2)
THERMOSTAT
M22392