Honeywell 50001137-001 Instrucciones De Instalación página 5

Mount Small Cover Plate to a Horizontal 2 in. X 4 in. Electrical Box (See Fig 4)
1. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall plate on
the electrical box with the arrows pointing up.
2. Insert two #6-32 X 5/8 flat head screws. Check leveling, if desired, and tighten the flat head screws.
Fig. 4. Mount cover plate, wall plate and thermostat to a horizontal 2 in. X 4 in. electrical box.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2005 Honeywell International Inc.
69-1738EFS—1 J.S. Rev. 2-05
ELECTRICAL BOX
WIRE
COVER PLATE
U P
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Scarborough, Ontario M1V 4Z9
50001137-001 COVER PLATE ASSEMBLY
WIRE HOLE
MOUNTING HOLES (2)
WALL PLATE
WIRE HOLE
MOUNTING HOLES (2)
#6-32 X 5/8 FLAT HEAD
SCREWS (2)
THERMOSTAT
M22393