English; Appliance Description; Before Using The Appliance For The First Time - Alessi SG67 Manual De Instrucciones

English

Designed by Stefano Giovannoni in
2004, this mini vacuum cleaner has
been tested and certified to guarantee
the safety of the consumer.
WARNING!
• Before using the appliance,
carefully read and follow the
directions. Consult and keep
them on hand for the entire
time of use.
• Dispose of the packaging pro-
perly and keep the plastic bags
out of reach of children.
• Do not use the products for
purposes other than those
intended. Alessi declines all
responsibility for damage cau-
sed by improper use.
• Do not connect to a voltage dif-
ferent from the rating indicated
on the bottom of the appliance.
• Do not use adaptors or exten-
sion leads that do not comply
with the safety regulations in
force.
• Do not use a battery-charger
base different from the one
contained in the package.
• Do not pull the cord to unplug
the appliance.
• KEEP THE APPLIANCE OUT
OF REACH OF CHILDREN.
• When using the appliance, keep
away from face.
• Do not immerse the appliance
in water or other liquids.
• Do not place the battery-char-
ger base in the open or near
water.
• Do not expose the appliance to
temperatures greater than 40° C.
All manuals and user guides at all-guides.com
• THIS PRODUCT IS FOR
DOMESTIC USE ONLY.
• Do not vacuum substances or
products that are hot (embers,
cigarettes, matches), toxic (sol-
vents), flammable or explosive
(petrol, alcohol), sharp (glass)
or corrosive (acids, detergents).
• Always disconnect the applian-
ce before performing mainte-
nance.
• Do not use the appliance
without a filter.
• Use only original Alessi accesso-
ries and spare parts.
• In case of malfunction or dama-
ge to the appliance, battery-
charger base or cord, disconnect
the appliance, do not use it and
contact the authorised Alessi
dealer nearest you.
• The battery must be remo-
ved from the appliance befo-
re it is scrapped.
The appliance must be
•
disconnected from the sup-
ply mains when removing
the battery.
Dispose of battery in confor-
•
mity to your country's waste
disposal laws.
• THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY.
• This appliance is not intended
for use by persons (including
children) with reduced physi-
cal, sensory or mental capa-
bilities, or lack of experience
and knowledge, unless they
have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety.
• CHILDREN SHOULD
BE SUPERVISED TO
ENSURE THAT THEY DO
NOT PLAY WITH THE
APPLIANCE.
11

APPLIANCE DESCRIPTION

A mini vacuum cleaner
B filter holder
C filter
D container/tank
E thermoplastic accessory for narrow
spaces
F rubber accessory for vacuuming
liquids
G battery-charger base
H adhesive guide
I screws with anchors
The appliance features two
push buttons for turning it on:
• the one located on the front label-
led "Pulse Mode" must be kept
pressed to turn on the appliance.
When the push button is released,
the appliance will turn off. This
push button enables greater vacuu-
ming power;
• "Continuous Mode" must be pres-
sed once to turn on the appliance.
Press the push button again to
turn it off. (Fig. 2)
"Pulse Mode"
Fig. 2
"Continuous Mode"
BEFORE USING THE APPLIANCE
FOR THE FIRST TIME
• After having removed the applian-
ce from the package, make sure
that it has not been subject to
damage in any way.
How to fix the battery-charger
base to the wall
• Choose where you wish to posi-
tion the battery charger.
• Make sure that the length of the
cord is enough to reach the outlet.
• Wind any excess cord around
the cord winder underneath the
battery-charger base. Pass the cord
through the groove. (fig. 3)
Fig. 3
• Apply the adhesive guide to the wall
and, with a 5 mm-diameter wall
drill, make the holes marked on the
adhesive. (fig. 4)
• Insert the anchors in the wall and
secure the battery-charger base
with the screws. (fig. 5)
How to charge the appliance
• Insert the appliance in the batte-
ry-charger base with the opening
facing upward and connect to the socket.
• If the appliance is positioned cor-
rectly, the light around the push
buttons will turn red. (fig. 6)
12
Fig. 4