Safety Instructions - Starlyf FAST HEATER Manual De Instrucciones

English
Congratulations on your purchase of the Starlyf® Fast Hea-
ter, the wall-socket space heater. This cordless ceramic
heater provides fast and easy heat anywhere in the house.
Just plug it in and set the temperature. The two-speed fan
guarantees constant comfort and the digital display can be
used to set any temperature from 15ºC to 32ºC.
Please read this user manual carefully and pay close atten-
tion to all the safety instructions before using the product for
the first time. Keep this manual on hand for future use.
CONTENTS

1. SAFETY INSTRUCTIONS

2. INSTRUCTIONS FOR USE
3. CARE AND MAINTENANCE
1. SAFETY INSTRUCTIONS
Use Starlyft® Fast Heater indoors with the win-
dows and doors closed to stop the heat from es-
caping.
For best results, place Starlyft® Fast Heater close
by, at a maximum distance of 3 metres.
- To ensure the heater does not overheat and to avoid the
risk of fire, do not cover the device. Keep it away from com-
bustible materials.
- The heater should not be plugged in immediately below
a socket.
Do not use this heater in the immedia-
te surroundings of a bath, a shower or
a swimming pool. Do not use the hea-
ter in the bathroom within a distance
of 3.0 m in all directions away from
the bathtub, shower head, water tap or other water contai-
ner ( See below figure) and any other positions subjected
to splash. Please make sure the heater can't be touched
by persons who are taking a bath Do not use the heater in
laundry areas and similar indoor locations where splash may
occur. The heater shall be in a position that, after being plug-
ged in the socket outlet, the bottom line of the appliance kept
at least 0.2m above the floor.
DESIGNED EXCLUSIVELY FOR WALL SOCKETS
CAUTION: To reduce the risk of fire and electric shock, do
not use extension cables.
CAUTION: POTENTIAL ELECTRICAL HAZARD IF THESE
RULES ARE NOT FOLLOWED.
Read the instructions before using the heater for the first
time.
When using household appliances, it is always essential
to take basic precautions to reduce the risk of fire, electric
shock and personal injury. These precautions include the
following:
· This heater should be plugged into a 220V-240V circuit.
Nothing else should be plugged into the same circuit. If you
are not sure whether your home complies with this specifi-
cation, consult a qualified electrician before using the pro-
duct. Failure to comply with this requirement may cause fire,
overheating, poor performance, material damage, injury and
even death.
· Do not connect it to extension cables, surge protectors,
timers, residual-current devices or sockets where other hou-
sehold devices are plugged in. Failure to comply with this
requirement may cause fire, overheating, poor performance,
material damage, injury and even death.
· This product heats up when operating. To avoid burns,
keep bare skin from making contact with hot surfaces.
· Place the front of the heater at least 0.9 m away from com-
bustible materials, such as furniture, pillows, bed linen, pa-
pers, clothing and curtains, and keep these materials away
from the sides and rear of the heater.
- This device is not designed for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties or who lack expertise and do not know how to use the
device, unless they are supervised or given instructions on
using the device by someone responsible for their safety.
Children should be supervised to ensure they do not play
with the device.
· Unplug the heater when not in use.
· Do not use the heater if the plug is damaged, the heater
does not work properly, or the device has fallen and been da-
maged in any way. Throw it away or take it to an authorized
technical service centre for examination and repair.
· Do not use the product outdoors. If the heater is exposed to
inclement weather (rain, snow, sun, wind or extreme tempe-
ratures), it could become a safety hazard.
· Never place the heater where it can fall into a bath or any
other container with water.
· To disconnect the heater, first switch the ON/OFF button
to the OFF position and then unplug it from the wall socket.
· Do not allow any objects to enter the air intake and out-
let vents or to block the vents, as this could cause electric
shock, fire and damage to the heater.
· To prevent fire, do not block the air intake and outlet vents
in any way. Do not use the heater on soft surfaces (such as
a bed) where the air vents could be blocked.
· The heater has hot parts and interior parts that can pro-
duce sparks and electric arcs. Do not use in places where
gasoline, paint or flammable liquids are stored. Do not use