Care And Maintenance - Starlyf FAST HEATER Manual De Instrucciones

Ocultar thumbs Ver también para FAST HEATER:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
flammable solvents to clean the device. Keep the product
dry at all times.
· The heater should only be used as described in this ma-
nual. Any other use not recommended by the manufacturer
could cause fire, electric shock or personal injury.
SERVICING DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two insulation
systems are provided instead of an earth wire. No
earthing means is provided on a double-insulated
appliance, nor should a means for earthing be ad-
ded to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and
should only be done by qualified service personnel. The
replacement parts for a double-insulated appliance must
be identical to the parts they replace. A double-insulated
appliance is labelled with the words "CLASS II" or "DOUBLE
INSULATED". It can also be identified with the double insu-
lation symbol.
2. DIRECTIONS
1. Plug the Starlyf® Fast Heater into a 220V-240V socket. (1)
2. To turn on the heater, switch the ON/OFF button (on the
side of the device) to the ON position. (2)
3. Select the desired temperature. On the digital display, use
the "+" button to increase the temperature and the "-" button
to reduce it (between 15ºC and 32ºC). (3)
4. Select the desired fan speed. On the digital display, press
the fan speed button to choose either high speed (HH) or
low (LL). (4)
5. When you finish using the device, switch the ON/OFF bu-
tton to the OFF position and unplug the Starlyf® Fast Heater
from the power socket. Store the device in a cool, dry place
until the next time you need it. (5)
Remark: The device stops heating when the target tempe-
rature is reached.
SETTING THE TIMER
The Starlyf® Fast Heater has a built-in timer that automatica-
lly shuts off the device after a pre-set time period.
1. After plugging in and turning on the Starlyf® Fast Heater,
press the timer button to activate it, as shown in the figure
(6).
2. Press the timer button repeatedly until the display shows
the number of hours you want the Starlyf® Fast Heater to
stay on before shutting off. You can choose from 1 to 12
hours.
3. Once the desired number of hours is displayed, stop pres-
sing the button.
4. To cancel the timer, turn off the Starlyf® Fast Heater.
NOTE: For safety reasons, the Starlyf® Fast Heater's maxi-
mum default timer setting is 12 hours.

3. CARE AND MAINTENANCE

CAUTION: Before beginning any kind of maintenance task,
unplug the Starlyf® Fast Heater and wait until it has comple-
tely cooled down.
· Use a damp, non-abrasive cloth to wipe down the exterior. If
necessary, use a mild soap. Dry with a soft cloth.
WARNING: DO NOT ALLOW LIQUID TO ENTER THE
HEATER
DO NOT use alcohol, gasoline, scouring powder, furniture
polish or scrub brushes to clean the heater. This could da-
mage the product housing.
DO NOT immerse the Starlyf® Fast Heater in water.
· Wait until the device is completely dry before using it.
· Store the heater in a cool, dry place when not in use.
Warning: If the device stops working because it overheats,
unplug it from the power socket and plug it in again.
SPECIFICATIONS:
Voltage: 220V-240V (50 Hz)
Energy consumption: 400 W
Quality Warranty:
This product is covered by a warranty against manufacturing
defects subject to the time periods stipulated by the legisla-
tion in force in each country.
This warranty does not cover damages resulting from ina-
dequate use, negligent commercial use, abnormal wear and
tear, accidents or improper handling.
Australia & New Zealand only
This product has the benefit of certain Consumer Guaran-
tees. These are prescribed by the Australian Consumer Law
& the New Zealand Consumer Guarantees Act 1993 both of
which provide protection for consumers. There is no express
warranty for this product in Australia or New Zealand. The
above paragraph refers to other countries.
CAUTION:
DISPOSAL OF MATERIALS
A symbol of a crossed-out wheeled bin means you
should find out about and follow local regulations
about disposing of this kind of product.
Do not dispose of this product as you would other
household waste.
Dispose of this device in accordance with the corresponding
local regulations.
Electrical and electronic devices contain hazardous substan-
ces that can have harmful effects on the environment and/or
human health and should be recycled properly.
Made in China

Publicidad

Tabla de contenido
loading

Tabla de contenido