Charging The Device - Veridian Healthcare TENS + Heat Wireless Manual De Instrucciones

CHARGING THE DEVICE

This device includes an internal rechargeable battery
within the electrical stimulator unit and USB cable.
A USB wall charger/adapter (5V, 1.5A-6A) is required
for charging; not included.
Before first use, the device should be fully charged. Charging time may
vary depending on the wall adapter used; 3–6 hours from depleted
battery to full charge.
1. Connect the wide end of the USB cable to
a wall adapter.
2. Connect the smaller mini USB to the TENS
stimulator.
3. During charging the battery symbol on
the stimulator will flash. When the device
is fully charged, the battery symbol will be
solid green.
4. Unplug the charger and stimulator when
fully charged; never operate the unit while
charging.
16 • ENGLISH