Specification; Function - Temper KOBAN KDP-8MW Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Welcome to use KDP-8MW Microwave Sensor!
The product is a new saving-energy switch; it adopts microwave sensor mould with
high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism,
convenience, safety, saving-energy and practicality functions. The wide detection field is
consisting of detectors. It works by receiving human motion. When one enters the
detection field, it can start the load at once and identify automatically day and night. Its
installation is very convenient and its using is very wide. Detection is possible through
doors, panes of glass or thin walls.

SPECIFICATION:

Power Sourcing: 220-240V/AC
Power Frequency: 50Hz
Ambient Light: <3-2000LUX (adjustable)
Time Delay: Min.10sec±3sec
Max. 12min±1min
Rated Load: 1200W
300W

FUNCTION:

--Can identify day and night: It can work in the daytime and at night when it is adjusted
on the "sun" position (max). It can work in the ambient light less than 3LUX when it is
adjusted on the "3" position (min). As for the adjustment pattern, please refer to the
testing pattern.
--SENS adjustable: It can be adjusted according to using location. The detection
distance of low sensitivity could be only 5m and high sensitivity could be 15m which fits
for large room.
--Time-Delay is added continually: When it receives the second induction signals within
the first induction, it will restart to time from the moment.
--Time–Delay is adjustable. It can be set according to the consumer's desire. The
minimum time is 10sec±3sec. The maximum is 12min±1min.
NOTE: the high-frequency output of the HF
sensor is <0.2Mw- that is just one 5000th
of the transmission power of a mobile
phone or the output of a microwave oven,
the baby can't touch it
www.grupotemper.com
Microwave Sensor
Detection Range: 180°
Detection Distance: 5-15m (adjustable)
HF System: 5.8GHz CW radar, ISM band
Transmission Power: <0.2mW
Installing Height: 1-1.8m
Power Consumption: approx 0.9W
Detection Motion Speed: 0.6-1.5m/s
KDP-8MW
13

Publicidad

Tabla de contenido
loading

Tabla de contenido