BEARWARE 303583 Manual Del Usuario página 28

Note: Before configuring, it is advisable to note down the times (start time and
end time + mode, which needs to be activated) and then carry out the configura-
tion using the notes.
The device automatically stores the programmed values. The configured data is
retained even in the event of power failure or power disconnection.
Example:
The following diagram shows Tuesday as an example. The comfort mode is active
from 0:00 to 1:59, from 5:00 to 7:59, 10:00 to 11:59, 14:00 to 18:59 and from
21:00 to 23:59.
11. Cleaning Instructions
Clean the thermostat with a dry cotton cloth. Make sure that the product is
switched off and completely disconnected from the mains. Never use any chem-
ical cleaning agents. Never use liquids which could damage the surface of the
product such as scouring milk.
12. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
hence please use it only in dry surroundings. Protect it from high humidity, water
and snow. Keep the device away from high temperatures. Do not expose the de-
vice to sudden changes in temperature or strong vibrations, as this could damage
the electronic components. Check the device for any damage before using it. The
device should not be used if it was subject to impact or has been damaged in
28
English