Honda Odyssey 1995-1998; Honda Odyssey 1999-2004; Isuzu Oasis 1996-1999 - Metra 99-7898 Instrucciones De Instalación Para La Pieza

Honda Odyssey 1995-1998

Isuzu Oasis 1996-1999

1. Lower the glove box assembly.
2. Remove (2) Phillips screws exposed
on the right side of the underdash.
3. Remove (2) Phillips screws from the
driver's side knee bolster and (1)
Phillips screw in the coin pocket.
4. Remove (5) Phillips screws from the
underdash panel and remove the
panel. (Figure A)
(Figure A)
Dash Disassembly 99-7898
5. Remove (4) Phillips screws from the
cupholder assembly and remove.
6. Remove (2) Phillips screws
securing the factory radio and
disconnect the wiring.
7. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "D" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"D"
"D"
"H"
"H"
(Figure B)

Honda Odyssey 1999-2004

1. Unclip the radio trim bezel
(including the climate control panel
and remove). (Figure A)
2. Remove (4) Phillips screws
securing the factory radio and
disconnect the wiring.
3. Cut and remove the mounting clips
from the radio housing.
4. From the mounting brackets cut
and remove tabs "A" (the tabs can
be identified by the stamped letter
near each tab). (Figure B)
5. Secure the brackets to the housing
with (4) #8 x 3/8" Phillips pan head
screws. (Figure B)
Continue to kit assembly
11
(Figure A)
"A"
(Figure B)