Inspection; Inspection Log - Guardian Fall Protection Diablo 2.0 SRL Manual De Instrucciones

Inspection

Prior to EACH use, inspect Diablo SRL for deficiencies, including, but not limited to, corrosion, deformation,
pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, and
missing or illegible labels. IMMEDIATELY remove Diablo SRL from service if defects or damage are found, or
if exposed to forces of fall arrest.
Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,
cracking, and hazardous materials. Ensure that selected work area will support the application-specific
minimum loads set forth in this instruction manual. Work area MUST be stable.
At least every 12 months, a Competent Person other than the user must inspect Diablo SRL. Competent
Person inspections MUST be recorded in inspection log in instruction manual and on equipment
inspection grid label. The Competent Person must sign their initials in the box corresponding to the
month and year the inspection took place.
During inspection, consider all applications and hazards Diablo SRL has been subjected to.

Inspection Log

Date of First Use: __________________.
Product lifetime is indefinite, as long as it passes all pre-use and Competent Person inspections. User
must inspect prior to EACH use. Competent Person other than user must complete formal inspection at
least every 12 months. Competent Person to inspect and initial.
This inspection log must be specific to one Diablo SRL. Separate inspection logs must be used for
each Diablo SRL. All inspection records must be made visible and available to all users at all times.
If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE.
5