03. Press and hold the PAIRING button on the back of the
Base as shown below until the green LED starts blinking.
04.
As soon as pairing is successful the audio sounds will
start playing.
05.
Repeat the steps again if pairing was not successful.
Note: If you are pairing multiple speaker, you can only pair
one speaker at a time.
11.
USING A HEADPHONE:
Plug in your headphone to the Headphone jack on the side of the
Speaker as shown below. No sound will be emitted from the
Speaker while the Headphone jack is plugged in. Adjust the
headphone volume by rotating the Volume knob on the Speaker.
www.sereneinnovations.com