Cleaning And Maintenance; Optional Accessories - Serene Innovations SEREONIC BT-200 Guia De Funcionamiento

TROUBLESHOOTING:
No sound from the Speaker:
A blinking green LED on the base indicates that audio is NOT
detected by the base. Please check all connections to ensure
that all the cords are firmly connected at the back of the base
and TV Also, confirm that the Speaker is not more than 100 feet
away from the base.
There is sound from the TV, but no sound from the Speaker:
Check your TV speaker setting by going into the TV Menu, using
your TV remote and ensuring the TV is sending audio signals to
external speakers.
If you are using Digital audio connection such as Optical or
HDMI connection, please make sure that the audio setting on
your TV sound is set to PCM and NOT Dolby digital. Please refer
to the Dolby Digital section on page X.
The Low Battery/Charging indicator keeps blinking
on the Speaker:
This indicates that the battery is low and needs to be placed on
the base for recharging. When fully charged, the blinking will
stop. If the blinking does not stop, check to make sure the
Speaker is firmly connected and properly seated on to the Base.
13.

CLEANING AND MAINTENANCE:

Unplug the AC adapter from the wall. Use dry, soft cloth to clean
and dust the outside surfaces and the charging contacts. Do not
immerse the Speaker or the Base in water.

OPTIONAL ACCESSORIES:

BT-200RX
Extra receiver for added
Convenience and mobility
HAC-200
HDMI to Analog Converter for
connecting the BT-200 to you
TV using HDMI port from your
TV cable/Satellite Box.
BT-200 APTR
Extra adapter to charge your
Speaker without the base.
DAX-200
Digital to Analog Converter for
connecting the BT-200 to your
TV using Optical output Port
for Dolby Diggital Audio.
www.sereneinnovations.com