Connections & Set Up - Serene Innovations SEREONIC BT-200 Guia De Funcionamiento

CONNECTIONS & SET UP:
01 Connect to the RCA Analog Audio out on your TV:
Connect the Base to the back of the TV using the RCA to 3.5mm
cable as shown below. Once audio is detected, the green LED on
the Base will stop flashing; a slow blinking LED indicates audio is
NOT detected. Make sure your TV is on and the Audio settings in
your TV is set to output sound to external speakers.
* See Fig. 1 A if connection is occupied
AC Adapter
Audio Cable
Fig. 1
*If RCA audio connection on your TV are occupied by another
device, use the supplied Y Splitters cables as shown in Fig. 1A
Copyright 2020 Serene Group, Inc. All rights reserved.
If RCA connections are occupied by another device:
If RCA audio connections are occupied by another device, use
the supplied RCA Y Splitters cables as shown below
Y Splitters
provided
To other device
Base
To other device
AC Adapter
Audio Cable
Fig. 1A
04.