HAMPTON BAY Minorca Manual Del Propietário página 10

Light Kit
Bracket
Blue
Black
Light Kit
Switch
Cup
Glass Shade
Hex Nut
Finial
8.
Blade Balancing
All blades are grouped by weight. Because nat-
ural woods vary in density, the fan may wobble
even though the blades are weight matched. The
following procedure should correct most fan
wobble. Check after each step.
White
1. Check that all blade and blade bracket
White
screws are secure.
Mounting
2. Most fan wobble problems are caused when
Screws
blade levels are unequal. Check this level by
Sockets
selecting a point on the ceiling above the tip
Bulbs
of one of the blades. Measure from a point
on the center of each blade to the point on the
ceiling. Measure this distance as shown in
Rubber Washer
Figure 13. Rotate the fan until the next blade
is positioned for measurement. Repeat for
each blade. Measurement deviations should
Figure 12
within 1/8". Run the fan for 10 minutes.
3. If the fan continues to wobble please contact
Customer Service and a balacing kit will be
sent to you at no charge.
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE HOLDERS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NOT INSERT FOREIGN
OBJECTS BETWEEN ROTATING BLADES.
Figure 13