Time Setting - Wiseup DVW-0001 Guia Del Usuario

4.1. Power off the camera, unscrew the knob cover and connect the camera to your proper PC
computer USB port using the USB cable provided.
4.2. The camera will be recognized as a removable disk drive.
4.3. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the camera, unscrew the knob cover to reveal the mini USB port and connect the
camera to your proper PC computer USB port using the USB cable provided.
5.2. The camera will be recognized as a removable disk drive.
5.3. Click on the drive in the root directory and inside the root directory, open the file named
"TAG.txt".
5.4. Write the current date and time in the "TAG.txt" file with the correct format: YYYY-MM-DD
HH:MM:SS (For example: 2016-04-12 14:24:32). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera and connect the camera to an outlet AC power supply using the
DC5V power adapter and the USB cable provided.
6.2. The red indicator light will keep flashing during the charging process.
6.3. It will take 2 hours to obtain a full charge.
6.4. The red indicator light will still keep flashing when the camera is fully charged.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, press the Power Button and Camera Button
simultaneously once; the camera will shut down automatically. Then you can restart the camera
with factory default settings.
VIII. Time Setting
8.1. Pull the Time Adjustment Knob until you hear a click. Both hour and minute hands will be
stopped.
8.2. Rotate the Time Adjustment Knob to set time.
8.3. Push the Time Adjustment Knob back after the time set is completed.